PCB Design Printout



Full Wave Rectifier Power Supply PCB with Toner Transfer
Sold: 10 pcs
Product Code :  PCB-TT-1A-FWRPS-CP
Category: Toner Transfer PCB
Center Tapped Transformer Full Wave Rectifier Power Supply PCB (Copper Pour) with Toner Transferred, Ready for Etching.
PCB: 1.9"x2.9" (49mm x 74mm) Paper Phenolic Single Sided, Track Width: 2mm, Copper Pour Clearances: 1.5mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N4007 (2pcs), Capacitor 2200uF (1pc), Capacitor 100nF (1pc), LED 5mm (1pc), Resistor 0.5W 1.5K (1pc), 3 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB..
Price: Rs  36.80 ~ 34.95
Availability:  Out Of Stock

  Quantity  

Transistors LED Flasher PCB - 2 LEDs (Copper Pour) Print Out on Toner Transfer Paper
Sold: 50 pcs
Product Code :  Print-TP-Flasher-2T2L-CP
Category: Printout on Toner Paper
2 Transistors 2-LEDs Flasher PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Blank PCB 2x3 (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB..
Price: Rs  8.00 ~ 4.80
Availability:  50 pcs In Stock

  Quantity  

IR Infrared Obstacle Sensor PCB Print-out on Toner Paper
Sold: 2 pcs
Product Code :  Print-TP-IROSM-358
Category: Printout on Toner Paper
IR Infrared Obstacle Sensor Module PCB - LM358 - Print Out on Toner Transfer Paper.
PCB Size: 0.9"x1.9" (23mm x 48mm), Trace Width: 0.75mm, Mounting Hole: 1 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: IC LM358 (1pc), IR Emitter (1pc), IR Receiver (1pc), LED 5mm Red (1pc), Resistor 0.25W 1.5K, 22K & 180 Ohm (1pc each), 3-Pin Relimate Male Header (1pc), Small Preset 20K (1pc), Blank PCB 1x2 (1pc).
Note: You can change the components according to your requirement. .
Price: Rs  8.00 ~ 4.80
Availability:  48 pcs In Stock

  Quantity  

Transistors LED Flasher PCB - 2 LEDs Print Out on Toner Transfer Paper
Sold: 1 pc
Product Code :  Print-TP-Flasher-2T2L
Category: Printout on Toner Paper
2 Transistors 2-LEDs Flasher PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Blank PCB 2x3 (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB..
Price: Rs  8.00 ~ 4.80
Availability:  49 pcs In Stock

  Quantity  

Over Load and Short Circuit Protection PCB with Toner Transfer
Sold: 1 pc
Product Code :  PCB-TT-Over-Load-324-CP
Category: Toner Transfer PCB
Over Load and Short Circuit Protection PCB (Copper Pour) with Toner Transferred, Ready for Etching.
Protecting your layout from short circuits and overloads is essential to prevent damage to equipment.
PCB Size: 3.9"x5.9" (99mm x 150mm), PCB Etching: No, PCB Drilling: No,
Components List for this PCB:
( Show More ) .
Price: Rs  107.70 ~ 102.30
Availability:  Out Of Stock

  Quantity  

Transistors LED Flasher PCB - 2 LEDs  with Toner Transfer
Product Code :  PCB-TT-Flasher-2T2L
Category: Toner Transfer PCB
2 Transistors 2-LEDs Flasher PCB with Toner Transferred, Ready for Etching.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Mounting Hole: 4 x 3mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB..
Price: Rs  36.80 ~ 34.05
Availability:  Out Of Stock

  Quantity  

IR Infrared Obstacle Sensor PCB with Toner Transfer
Sold: 10 pcs
Product Code :  PCB-TT-IROSM-358
Category: Toner Transfer PCB
IR Infrared Obstacle Sensor Module PCB - LM358 with Toner Transferred, Ready for Etching.
PCB Size: 0.9"x1.9" (23mm x 48mm), Trace Width: 0.75mm, Mounting Hole: 1 x 3mm, PCB Etching: No, PCB Drilling: No.
Components Required: IC LM358 (1pc), IR Emitter (1pc), IR Receiver (1pc), LED 5mm Red (1pc), Resistor 0.25W 1.5K, 22K & 180 Ohm (1pc each), 3-Pin Relimate Male Header (1pc), Small Preset 20K (1pc).
Note: You can change the components according to your requirement..
Price: Rs  27.10 ~ 25.75
Availability:  Out Of Stock

  Quantity  

2A Full Wave Bridge Rectifier Power Supply PCB Print-out on Toner Paper
Sold: 1 pc
Product Code :  Print-TP-2A-FWBRPS-CP
Category: Printout on Toner Paper
2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement..
Price: Rs  8.00 ~ 4.80
Availability:  52 pcs In Stock

  Quantity  

Transistors LED Flasher PCB - 2 LEDs (Copper Pour) with Toner Transfer
Product Code :  PCB-TT-Flasher-2T2L-CP
Category: Toner Transfer PCB
2 Transistors 2-LEDs Flasher PCB (Copper Pour) with Toner Transferred, Ready for Etching.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB..
Price: Rs  36.80 ~ 34.05
Availability:  Out Of Stock

  Quantity  

Full Wave Rectifier Power Supply PCB Print-out on Toner Paper
Product Code :  Print-TP-1A-FWRPS-CP
Category: Printout on Toner Paper
Center Tapped Transformer Full Wave Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper..
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (2pcs), Capacitor 2200uF (1pc), Capacitor 100nF (1pc), LED 5mm (1pc), Resistor 0.5W 1.5K (1pc), 3 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB..
Price: Rs  8.00 ~ 4.80
Availability:  50 pcs In Stock

  Quantity  

2A Full Wave Bridge Rectifier Power Supply PCB with Toner Transfer
Sold: 1 pc
Product Code :  PCB-TT-2A-FWBRPS-CP
Category: Toner Transfer PCB
2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) with Toner Transferred, Ready for Etching.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement..
Price: Rs  36.80 ~ 34.95
Availability:  Out Of Stock

  Quantity  

2A Full Wave Bridge Rectifier Power Supply PCB Print-out on Toner Paper
Product Code :  Print-TP-2A-FWBRPS
Category: Printout on Toner Paper
2A Full Wave Bridge Rectifier Power Supply PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement..
Price: Rs  8.00 ~ 4.80
Availability:  54 pcs In Stock

  Quantity  

Showing 1 to 12 of 12 (1 Pages)