2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

Center Tapped Transformer Full Wave Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper..
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (2pcs), Capacitor 2200uF (1pc), Capacitor 100nF (1pc), LED 5mm (1pc), Resistor 0.5W 1.5K (1pc), 3 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Center Tapped Transformer Full Wave Rectifier Power Supply PCB (Copper Pour) with Toner Transferred, Ready for Etching.
PCB: 1.9"x2.9" (49mm x 74mm) Paper Phenolic Single Sided, Track Width: 2mm, Copper Pour Clearances: 1.5mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N4007 (2pcs), Capacitor 2200uF (1pc), Capacitor 100nF (1pc), LED 5mm (1pc), Resistor 0.5W 1.5K (1pc), 3 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) with Toner Transferred, Ready for Etching.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

Center Tapped Transformer Full Wave Rectifier Power Supply PCB.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2mm, Copper Pour Clearances: 1.5mm, Mounting Hole: 4 x 3mm.

Components Required: Diode 1N4007 (2pcs), Capacitor 2200uF (1pc), Capacitor 100nF (1pc), LED 5mm (1pc), Resistor 0.5W 1.5K (1pc), 3 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

2A Full Wave Bridge Rectifier Power Supply with Switch PCB.
Size: 1.9"x2.9" (49mm x 74mm).
Components Required: Diode 1N5408 (4pcs), Capacitor 4700uF - 35V (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.25W 1.5K (1pc), 2 Way PCB Terminal Block (2pc), SPDT 3A Switch (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N5408 (4pcs), Capacitor 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB With Copper Pour.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

5A Full Wave Bridge Rectifier Power Supply PCB.
Size: 2.9"x3.9" (74mm x 99mm), Track Width: 3mm, Copper Pour Clearances: 1.5mm, Mounting Hole: 4 x 3mm.

Components Required: Diode 6A4 (4pcs), Capacitor 4700uF - 50V (2pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 3.9K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Assembled Unregulated Power Supply - Full Wave Bridge Rectifier

This kit is a quick, neat, and inexpensive way to provide a smoothed 3V to 36V, 1A to 5A (Depending on transformer voltage & components), unregulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: Green for transformer connection, Output: 2 x Red Positive and 2 x Black Negative
Components Used: PCB (1.9"x2.9"), Diode, LED 5mm, 1.5K 0.5W CFR Resistor, Electrolytic Capacitor, Vishay 100nF 250V Polyester Film Capacitor, 2 Way PCB Terminal Block etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

12 Volts - 2 Amps High Quality Regulated Switching Power Supply with Fine Output Voltage Adjustment.
Input: 220V AC ±15%, Output: 12V-2A DC.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7805

This kit is a quick, neat, and inexpensive way to provide a smoothed 5V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 6V to 12V AC (Green for transformer connection), Output: 5V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled Unregulated Power Supply - Full Wave Bridge Rectifier

This kit is a quick, neat, and inexpensive way to provide a smoothed 3V to 36V, 1A to 8A (Depending on transformer & components), unregulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: Green for transformer connection, Output: 2 x Red Positive and 2 x Black Negative
Components Used: PCB (2.9"x3.9"), Diode, LED 5mm, 2.7K 0.5W CFR Resistor, Electrolytic Capacitor, Vishay 100nF 250V Polyester Film Capacitor, 2 Way PCB Terminal Block etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

12 Volts - 5 Amps High Quality Regulated Switching Power Supply with Fine Output Voltage Adjustment.
Input: 220V AC ±15%, Output: 12V-5A DC.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7806

This kit is a quick, neat, and inexpensive way to provide a smoothed 6V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 7.5V to 12V AC (Green for transformer connection), Output: 6V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7808

This kit is a quick, neat, and inexpensive way to provide a smoothed 8V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 9V to 12V AC (Green for transformer connection), Output: 8V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7809

This kit is a quick, neat, and inexpensive way to provide a smoothed 9V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 9V to 12V AC (Green for transformer connection), Output: 9V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7812

This kit is a quick, neat, and inexpensive way to provide a smoothed 12V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 12V to 15V AC (Green for transformer connection), Output: 12V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.